Open post

How to Became a DJ – What you should need to know?

How to become a DJ? How can I become a DJ? What I need? Where should I go? Here are some of the common questions that we hear from readers. So you want to be a DJ? You want the crowd to give you every thought. You want to be a central scene and focus on yourself. You want to be an artist, but do not know where to start. We do not think too much about the details, mainly because it’s a very personal journey, but we can help you get started and give you some skills that you need to know and the skills you need to learn.

Let us know before we begin. It’s not just a new adventure that you start, it’s a lifestyle change. It does not matter why you want to be a DJ. Everyone has his own reasoning. This commitment to music, and few people can understand it, not to mention the game. Being a DJ is not because of a weak or introverted heart. He puts your soul there and tells the world, “It’s me who I am!” Holding the slings or arrows of haters or blackmailers who think you’re rubbish, or think they can do more than you do. OK. You will have to face some of the worst people who do not think that you are an artist, but as a tool for making money. If you can leave it all to yourself, you will find a satisfactory, complex, exciting and fun business.

Became a DJ

First of all, what did the DJ actually do? Basically, you are the one who plays music anywhere. It’s simple, but there are more of them. There are also masters of turntables, club DJs, DJs and mobile DJs. You can focus on one, but a good DJ should be able to work in these disciplines. If you decided to just become a club DJ, it’s all right. Remember, this is your career.

A basketball player who can shoot, but can not defend, jump, pass or dribble, will not participate in any team. Being a DJ is no exception. If you can mix different types of music, and you can change your style at any time, you will be given as many possibilities as possible. You also need to be proficient in mixing and producing software. This is probably the most difficult part. Contact the software. Learn about the tools provided by the software and how they work – this will help you get used to breaking the music.

Buying a suitable DJ device

If you like, you can take a high-class route, but the cost of the equipment can be added quickly. First of all, you need two players or CD players, software (if you want to digitize), speakers, headphones and two-channel mixers / controllers. This is a bare-bones system that has just started to be used. Being a DJ is expensive, and when it comes to some projects, you want to start thrift so you can sharpen your skills and develop your style without breaking the bank.

The broken handle of the needle and the agitator will be permanent, the needle is not very cheap, but the turntable should be new. If you plan to simulate, the record will also be displayed. If you decide to use numbers, you still need a player and a mixer, but you also need to use the software and the computer. A DJ player can be a vinyl or a CD, but if you decide to use digital technology, think about using a completely digital setting – this is the easiest way. The software can be cheap or expensive, so at the beginning you need to save money and start experimenting.

How to find out DJ equipment

Countless switches, buttons, sliders and dials can be a bit complicated at first, but once you understand what they are giving you, they will look like your brush. Start using DJ to improve your skills to do this, you should be happy with the controls. Let’s start with the controller. A universal DJ controller (read a few excellent guides for beginners) can be the easiest budget, although they range in price from $ 100 to $ 3,500. The functions of the DJ controller and vinyl player are almost identical, except that the vinyl player actually uses the recording. You do not need a controller for $ 3,500, or it’s very likely.

In just a few hundred dollars you will get everything you need to start mixing and recording songs. Currently, the new controllers are equipped with a LAN connection, which allows simultaneous connection of several devices. It is combined with software that allows you to access the loops you create, share music between devices and synchronize them. Sliding mode allows you to loop or scratch the sound on another song, while the rotary switch (or scroll wheel) allows you to scratch and erase music.

Tips on how to become a DJ

To become a DJ is really connected with contacts, with other DJs, promoters, crowds and even with yours. Come out and watch the work of other DJs. Most people do not mind if they know your serious attitude towards a lifestyle, and some will even answer questions. See how they use the device, change the rhythm and interact with the crowd. Observing their skills, each DJ has different controls and different modes of operation. Study them and go home and practice these methods. Do not remove the phone or shoot it. This is a business where someone shoots your film at work, and then puts the film on your site so that they can make money, this is a serious problem. Always ask first if they refuse, please do not get discouraged or challenge them (remember, it’s all about relationships). A club that often plays your favorite music.

As your skills grow over time, you can access other clubs that can play other music that you like, so you can diversify your choices, make yourself more connected with the crowd, feel that they are Atmosphere, musical rhythm and songs. The promoter is a hybrid package.


Open post

What are the specifications of headphones?

If you are interested in knowing the type of headset (for example, “How it works” or “Design”, close or open, etc.), you can read the appropriate manual, as this special article will be more devoted to topics, through boxes or web- sites. The term “measuring” headphones at the bottom. Having said that, these words can be important, and there are several “specifications for headphones for technical terminology,” which we hope will help us complete this journey, some of which are more important than others. Here is our list and links to specific terms, if you are considering specific specifications. Otherwise, please do not hesitate to read.

Now I know what you’re thinking. It’s too much, I just want to know what term I need to find, so my music sounds good? Well, if you are looking for really high quality headphones, then you should be familiar with one of these headphone features. Understanding the meaning of these conditions will give you the tools you need to ensure the highest quality sound for your device. So, let’s solve some of these secrets.


What is a driver? Simply put, the headphone driver is just a magnet, some voice coils and aperture that can receive electrical signals from your device and convert them into sounds that your ears can receive. They come in different sizes and styles. Often, large drivers mean that you can manage them, but not scale them. While larger discs will give you lower frequencies at lower frequencies, sound will begin to decompose at higher frequencies. Think of it as a big subwoofer in a car or home theater. They have huge drivers and work well in explosions or 808 drums, but when you hear sounds or violins, the sounds are low or distorted. This is due to the fact that when the high-frequency sound passes, the actual surface of the diaphragm changes its shape, and for large drives the frequency response (which we will discuss later) becomes irregular and causes distortion. Smaller discs can also create very good bass levels, and some up to 6 mm in size provide deep bass without distorting higher frequency sounds. Drives come in different types, with balanced reinforcement, static, flat magnetic and dynamic.

Sensor technology

The headphone specifications vary with the brand, and the sensors are not really one of the products that you should be an expert to buy a good headset. All converters provide you with an electronic signal that a CD or phone will create and convert into sound waves that your ears can receive.

Frequency response

Frequency response is one of the technical terms with which you need to familiarize yourself with the specifications of the headset. The frequency response is the range in which the headphones reproduce the sound. Their spectrum ranges from high-frequency high frequencies (30,000 Hz) to low-frequency bass (5 Hz). Basically, the sounds of bass, treble and midrange that you hear in your headphones are similar to the acoustic system in a car. You can use large speakers for bass, midrange for midrange and smaller loudspeakers for high frequencies. In headphones they are usually combined into one speaker.

In general, the range is from about 5 Hz to 40,000 Hz, although most headphones try to stay in the range of 20 to 20,000 Hz. Noise above 20,000 Hz is not always detected for some people, and the noise level is below 18 Hz, and your eardrum does not sound as strong as it seems. Because not all companies mark their columns as the same, you will see something like “dB” plus / minus. Do not worry, all this means that the sound is perfect for the original recording in the entire frequency range and how accurately reproduced. This is sometimes called “flat” sound. The closer the number to zero, the closer the headphones


When it comes to headphone specifications, impedance is another technical term that you want to know when buying a new package. When the company lists this rating, you will consider it as a Greek letter to Omega and call it “om”. In short, this rating is expressed in the range from about 2 ohms to over 600 ohms, which basically means that you need to increase the volume to get the desired listening level. The higher the ohms, the more power the device needs to reach this level. Previously, the home stereo system could output enough power to control 4-8 ohm speakers, and it was very expensive. Today you can find high-impedance headphones, which take up only a fraction of the time. However, many headphones with a higher resistance require that the headphone amplifier fully activate them.


Sensitivity is another technical term for specifying headphones that you want to understand. In short, it depends entirely on efficiency. How effective is the conversion of electronic signals from CDs or mobile phones to undistorted sound waves. Sensitivity levels are listed in decibels (dB), and most headsets have a range of 85 to 105 dB. Anything above 110 dB will damage the human ear in a short time. This should be taken into account when the sound source is less than an inch from the ear.

Low-sensitivity headphones require more power from the device to provide you with high-quality sound, but in return they last longer than headphones with high sensitivity. High-sensitivity headphones provide better performance at lower power, but when you turn the volume up to maximum distortion, it becomes a factor, and headphones (and your ears) can be damaged over time.

Total Harmonic Distortion (THD)

Another term that you do not need to be an expert is full harmonic distortion or THD. Your device and headset have different levels of THD and can actually measure them in different ways. THD refers to the comparison of signals from the input and output of the device and is expressed as a percentage. The actual percentage is measured from the base test, and zero is excellent. As for the specifications of headphones, the human ear is unlikely to notice a complete harmonic distortion, especially if you think that most headphones have a rating of 0.1% to 0.005%. Even with noise-canceling headphones, you can still get sound from the outside world. For complete harmonic distortion, the lower the better. Expect as close as possible to zero.

Sound pressure level (SPL)

The sound pressure level is related to the sensitivity level we discussed earlier, so we will not spend too much time here. Although the sensitivity is completely dependent on efficiency, measuring the sound pressure level (or SPL) is the maximum dB level of these headphone outputs. When you see this rating, it will be displayed as dB SPL / mW or dB / mW, and today most headsets and headphones will be in the range of 85 to 125 dB SPL / mW.

Maximum input power

Now that our mind is getting rid of all this complex information, we will now begin to integrate these headphone specifications to help you better understand the importance of maximum power when searching for new headphones. The maximum value of the input power is the power that the headset can support, and is expressed in kilowatts (or milliwatts). Some companies do not list the maximum input power in a headset package or specifications, but you can find this information on the company’s website. The user guide for your source (mobile, amplifier, TV, etc.) should also provide you with this information. This is a coincidence when buying a new headset. Most phones produce about 1 W (0.001 mW), and a headphone amplifier can raise this number to 3 watts (0.003 mW). 3W is a lot of power, and if it does not fit, it’s easy to damage the headphones. Ideally, you need to find the speaker, which is closest to the maximum input power of the source.

Noise attenuation

The attenuation of noise is defined as the loss of acoustic energy. When sound waves pass through space and come into contact with other materials along the way, it loses its energy. For headphones, we are talking about structural materials used to reduce noise and absorption outside the headphones themselves. In most cases, this information is not very useful, and the attempt to find soundproof materials used by the company may be useless. Foam and cotton are the most common, but some companies use acoustic glass for soundproofing.


Open post

Buying Advice & Tips When Purchase a Drum

Jumping for a drum kit can be overwhelming. Two “integrated” packages can contain the same list of components, but prices range from $ 200 to $ 1,000.

When you buy drum kits, most of the information you want to know is not very useful, and you often sell drums to your drums or bassists or even the drum kits that they sell to you. This guide will provide you with some considerations, pay attention and any budget proposals.

What to consider when buying a drum

Working in different music stores, I can say that almost everything in the music store, based on the commission, is terrible. The system forces employees to sell products that are not suitable for customers, on the basis of which the products receive the highest commission. Unlike car dealers, sellers can only work at the price of their invoices. There are many factors that can influence what vendors recommend to you, ordered by the music store. The layout of musical instruments depends on many things.

For example, a music store can move a large number of devices from different manufacturers through one distributor, so there can be a big discount on its voluminous orders. Regardless of whether the brand suits you, sellers are more likely to sell products from these distributors, because they know that they have more opportunities to protect costs for the store.

In addition, manufacturers and distributors in the music industry often provide direct incentives for sellers or stores for individual products. For example, company A can offer a cash prize of $ 25 for each “Drumset B” or “Cymbal Pack C”, which the seller sells in September. So, regardless of whether these individual items are suitable for you, they will try to sell them as much as possible, and you do not know why it is so difficult for them to sell these individual products.

It is best to research online, read such articles (smart steps) and make a decision before you enter, or just make a purchase online. If you are concerned that the drums sent to your house may be damaged, the same shipping company will send them to the music store before assembly and display.

Set of one set of drums and film

No one, except the drummer who was assembling the drum sets. Usually you buy your bass drum and Tom together, your equipment is in parts or pack, and your drums are trapped. Despite the fact that you can replace some components, in some “integrated” packaging with small drums and hardware there is great value. The biggest factor to consider, in fact, not the shell itself, but hardware!

The first thing you need to do is to know exactly which equipment is included in the drum kit:

Buying a drum should not be confused. The standard package is equipped with two trusses, a hi-hat rack and a pedal. There is a good throne, excellent double farm support. To know that any one-in-one that carries cy 钹 will bring a cheap cy 钹, it sounds bad, and it will work almost immediately. Even if these brands are familiar, you want to replace them as soon as possible. Regardless of the fact that a solid machine with a dish should not influence your decision.

There are a lot of metal on the drum kit. Tighten the tabs at the top and bottom of each housing, tighten and loosen the drum screws, trusses, feet on the bass drum, pedals and pedals. The ease of use of your drum kit depends entirely on the quality of your metal parts. Enclosures only affect the sound quality. Your drum kit will probably be dismantled, moved and collected from time to time. Therefore, when it is recommended to buy a drum group of friends, I tend to those companies that produce high-quality and durable equipment.

The entry-level products Drum Workshop (DW) – Pacific Drums & Percussion (PDP) and Tama stand out in terms of equipment quality, which will be included in the all-in-one package. I bought Tama equipment for my drums in 2004, and since then I’ve performed a lot of performances, and I’ve never changed a single component.

Posts navigation

1 2
Scroll to top